Spool Dryer Lid Label AMS Ready Silica

These simple yet highly effective lids for Bambu Lab spools address the issue of spool pulling in the Bambu Lab AMS by adding weight, while simultaneously reducing system humidity. The extra cutout for labels ensures the spool is always clearly identified. With only two lids required, this method is time and filament-efficient, resulting in cost-effective production.

Product Features:

• Dual Functionality: Serves as a humidity absorber, compatible with silica beads or desiccant packets, and provides space for 40x30mm labels. Labels ensure consistent filament identification; there's no need to remove clips or tags before printing. Simply transfer the spool from a dry box or vacuum bag to the AMS—no modifications are needed.
• Compatibility: For Bambu Lab spools | AMS compatible
• Application: Snap the first lid into place, then fill with silica beads or insert desiccant packets from the opposite side. Snap the second lid onto the spool. Print and apply a suitable label.
• Quick Installation: Simply snap the lids into place
• Enhanced AMS Performance: Prevents spool pulling due to the added weight in the AMS.
• Humidity Optimization: Absorbs excess moisture and protects filaments from humidity damage
• Customizable Design: Saves time and filament by printing only two lids.

Labels can be downloaded from https://3dfilamentprofiles.com and printed with a label printer. Use 40x30mm labels.

A boost would be greatly appreciated.

Thank you

ruBEE