KitchenAid Handle for Tilt-Head Stand Mixer

2/17/25: The Slim Version has been uploaded!

1/11/25: V2 has been uploaded that has a notch cut out for any attachments like pasta rollers, etc. You can find it here!

1/10/25: I have added a Test Ring to the standard print profile. PLEASE print this first to make sure the handle will fit. Different models and years have proven to have different dimensions.

I saw Mr. Mixer's Love Handle and wanted something a little more… 3D printed 😉

So here's a handle for KitchenAid Tilt-Head Stand Mixers to help you tilt the head up and down as well as move the mixer around on your countertop! The hook at the end helps your hand to not slide off (courtesy of user-testing by my baker wife).

I have made a test ring so you can ensure the handle will fit your KitchenAid. It's only 2.6g because I hate to waste filament if I don't have to. But through some feedback from the community, many people have found my handle design to be too loose or too tight. Using this test ring as a gauge and scaling it up or down should help you get the perfect fit. If you do scale the handle, the screw hole may be too tight or too loose so you may need to alter that as well.

When removing the handle from the build plate, don't be afraid to just pull it up. The design is pretty strong and won't break that easily. The supports should stay on the build plate for easy removal.

If you'd like a slimmer version, let me know and I'll work on a sleeker design.

If you're looking for a way to store your mixer attachments, check out my KitchenAid Attachments Holder!