Regal 01 – Wall Shelf with Door
Print Profile(2)
Description
Shelf with door.
Same design as the “Regal 01”, but with a door.
------------------------------------
Dimensions:
230 mm wide
160 mm high
133mm deep
------------------------------------
On the back there are cutouts for wall mounting with screws.
There is also enough surface area to stick the shelf to the wall with adhesive strips (that's how I use it).
------------------------------------
On the bottom side, a cable guide is included, in case you want to route a USB-C cable to the inside.
The door has a receptacle for a magnet, but it also closes without a magnet.
------------------------------------
You will also need:
-8 x M4x14 screws (M4x12 or M4x16 will probably also work)
-8 x M4 nuts
-2 magnets 6mm x 2mm (optional - if you want to close the door with a magnet).
------------------------------------
The opening angle of the door shown in the pictures is the maximum opening angle.
------------------------------------
To avoid warping/deformation, disable the AUX fan!
------------------------------------
Boost Me (for free)
👍If you like my design, I would appreciate a boost, a "like" and/or your make.
☕️☕️If you would like to support me with a tip⬇️⬇️:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (35)