Articulated Corgi
Print Profile(2)
Description
Membership
Want to sell physical prints of this and/or any other of my models?! Subscribe to my Commercial License Membership! :D
Boost Me (for free)
If you like my models, consider giving me a boost! :D
— Important —
There is a “Multi Colored” and “One Color” version. The “Multi Colored” print poops a lot so keep that in mind before deciding if you want to print it. If you are gonna print the “Multi Colored” version I recommend to print multiple to reduce the amount of waste per model. Another option is to add another object to the buildplate and use "flush into this object". That way less filament is flushed/wasted.
_________________
If you experience any issues with the print, please leave feedback so that I can try to solve it, same goes if you have suggestions on how to improve the model!
Here are the settings I used on my A1:
Prime tower - On.
Z hop when retracting - 0.4mm.
Seam - Back.
0.12 layer height.
Ironing - On (20% flow), line spacing 0.13.
2 walls, 15% infill - Gyroid.
Flush into objects infill - On.
Brim type - Outer brim only. Brim object gap 0.1mm.
I printed with Matte PLA. Ivory White, Charcoal Black and Mandarin Orange.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (176)