hYPERfOCUS

cover

20231212_080025_29fad078-b790-4aa8-b5b4-b241139ef633.jpg

20231212_080040_9385c02f-0052-4218-9da3-df08084eeb29.jpg

20231212_080032_25cb1635-95ed-404e-9439-4f35f19e161d.jpg

plate_1.png

gif_temp_8fe88df9-bb2d-4d74-85f8-73ed03f4a8a7.webp

Each part is printed on the same build plate with different numbers of walls and infill %.

RECOMMENDED - variable walls and infill on one build plate.

plate_2.png

user_3992208546

IMG_0247.jpeg

0.2mm layer, 3 walls, 15% infill

Mil_Prints

PXL_20260209_005102201.jpg

PXL_20260209_005107663.jpg

I made it smaller and printed with TPU so that it can stand the multiple smacks from the portafilter. I made the center part with 40% infill

TPU Profile 0.2mm layer, 2 walls, 15% infill

_alex_pu_

IMG_20260602_163803.jpg

<h2>Coffee Knock Box V2 – Optimized 0.6 mm Print Profile</h2>The profile combines variable wall settings, variable infill and variable layer height on the same build plate. The impact-relevant areas — especially the knock bar and splitter section — are reinforced for better durability during daily use.<h3>Profile Highlights</h3><ul><li>0.6 mm nozzle</li><li>Variable layer height</li><li>Bambu PLA Basic / PETG</li><li>Textured PEI Plate</li><li>Variable walls and infill per part</li><li>Tree supports enabled</li><li>Auto brim enabled</li><li>All parts placed on one build plate</li></ul><h3>Notes</h3>After reading some feedback in the comments, I slightly reduced the size of the name tag on the bottom side for this print profile.

130x152x135mm Box smaller name tag

Mr.Cookie

tempImageebQFAW.jpg

tempImagevpxqUq.jpg

Every bar broke after a while, even when I printed them with PETG. So, I edited the profile with 30% infill and a 3D Honeycomb structure. This should help the bar stand up better against vertical impacts.

Bar only, 0.2mm layer, 3 walls, 30% infill 3D Honeycomb

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

This is V2 of my coffee knock box design which includes a puck splitter, and now also a splash guard. This is a two part print that click together, but are better glued together.

Coffee Knock Box V2

ASIA

Print Profile(5)

Description

Comment & Rating (328)

License

Related Models