HueForge - No Pain No Gain
Print Profile(1)
Description
Boost Me (for free)
Wenn euch meine Arbeit gefällt, würde ich mich über euren Support freuen
Buy me a Coffee …
Ko-Fi … https://ko-fi.com/lagnor69
Pay Pal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE
--------------------------------------------------------------------------------------------------------------
Hier findet Ihr die passenden Rahmen dazu
200 × 140 mm & 140 mm × 200 mm || All-in-One-Rahmen
https://makerworld.com/de/models/897636#profileId-856000
200 x 200 mm || All-in-One-Rahmen
https://makerworld.com/de/models/766355#profileId-701658
--------------------------------------------------------------------------------------------------------------
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.2mm
Filaments Used:
PLA Sunlu Meta Black Transmission Distance: 1
PLA Sunlu Matte White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to White for the rest.
License
Comment & Rating (2)