NIKE AIR JORDAN 1 inspired KEYCHAIN (new version)

-– Model inspired by the famous Nike Air Jordan 1 - V.2 --

I listened to your suggestions and instead of modifying the old model, I started from scratch, I am here to present the second version of the Nike Air Jordan 1 shaped keychain !!

With this shaped model, divided into customizable colors, you can print your keychain at 100% size in just over 2 hours, exactly as before, but given the work done, I will describe what is new:

• HIGHER MODEL RESOLUTION, thanks to which the details are incredible even when printed with a 0.4mm nozzle.
• GREATER CUT PRECISION, to ensure the most precise and simple assembly possible, you will just need to carefully remove the tree supports with the help of a cutter and the pieces will fit together easily.
• ADDED A NEW DETAIL IN THE SECOND COLOR, to make the keychain more similar to the original shoe, I added an additional printable detail in the second color.

Note given the small dimensions of the model, if printed at 100% it is possible that a very small adjustment of the lower walls of the pieces may still be necessary to ensure a perfect fit, this is due to overhang imperfections, I suggest 2 points that could be critical in this regard:

• pieces in the second color, lower part of the Nike swoosh.

• central body, lower edge of the high joint (ankle).

   

!!IMPORTANT!!!

Do you not have all the colors needed to print this model ...are you sure try taking a look at this project, thanks to which you can create new colors from those you already own you just need to check how much filament you need in terms of grams to print a certain part and then proceed to create the new color in the necessary quantity, seriously this idea (which is not mine) is brilliant, thanks jetpad !

https://makerworld.com/en/models/460079-multi-color-filament-mixer#profileId-368497