Motorised Marble Run
Print Profile(1)
Bill of Materials
- M5 x 20mm Screws x 3:
- M5 x 15mm Screw x 1:
- M5 x 10mm Screw x 1:
- M3 x 20mm Screws x 3:
- M3 x 10mm Screws x 1:
- KCD-101 Switch x 1:
- 9V Battery Connector x 1:
- 12V Geared Motor (12V, 30 rpm) x 1:
Description
An inspirational design re-engineered for 3D Printing.
Its designed to be used with 10mm balls/Marbles.
It is very addictive to watch. The design allows for use of up to 4 marbles with ease.
You will find the build instructions here:
https://www.youtube.com/watch?v=jIGBb8CHVqw
To complete this project, you will need the following
5 MR105 Bearings (If your print is loose or bearings unable to sit square, You may want to double up and put 2 bearings back to back in all the places.)
3 M5 x 20mm Screws
1 M5 x 15mm Screw
1 M5 x 10mm Screw
2 M3 x 20mm Screws
4 M3 x 10mm Screws
1 M3 x 20mm Screw
8 M3 Nuts
1 KCD-101 Switch
1 9V Battery Connector
1 12V Geared Motor (30 rpm)
A small length of DC Wire
Your Favourite Bonding Agent.
And some 10mm Steel Balls
You will also require the following tools:
Appropriate screwdriver (Powered Recommended)
Clamp
A pair of pliers.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (51)