JDPmelts

cover

IMG_9885.jpeg

BB4B3691-08AB-4813-8972-4E9AADC1042F.jpeg

IMG_9874.jpeg

IMG_9864.jpeg

plate_1.png

2024-12-21_939c2eced67608.jpeg

IMG_9880.jpeg

scary grinch Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 1.3mm The Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Black Transmission Distance: 0.6 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Gray Transmission Distance: 2 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Beige Transmission Distance: 8 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filamentsSwap Instructions: &nbsp;&nbsp;&nbsp;&nbsp;Start with Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #24 (2mm) swap to Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #27 (2.24mm) swap to Beige &nbsp;&nbsp;&nbsp;&nbsp;At layer #31 (2.56mm) swap to Jade White for the rest. &nbsp;

0.08mm layer, 2 walls, 15% infill

ZRounds

20241223_055333.jpg

20241223_055353.jpg

with colors and removed 1mm of nonsense from the base

scary grinch hueforge&nbsp;Swap Instructions:     Start with Black     At layer #24 (2mm) swap to Gray     At layer #27 (2.24mm) swap to Beige     At layer #31 (2.56mm) swap to Jade White for the rest.

scary grinch hueforge

ASIA

Print Profile(2)

Description

Comment & Rating (2)

License

Related Models