Search models, users, collections, and posts
Mashle Hueforge - Mash Burnedead
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.2 h
1 plate
Open in Bambu Studio
Boost
52
121
18
10
83
61
Released
Description
Boost Me (for free)
Project: Mashle.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 165.67x235mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Jade White
Border Only Colors from here until the end.
At layer #20 (1.76mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (18)