Hunter x Hunter Uvogin catching a Bullet Hueforge

The use of a 0.2mm nozzle is obligatory otherwise small details such as furigana and Kanji won't be readable.

The print is difficult which is why i recommend calibrating your black filament beforehand and using a brim

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.12mm

The Model is 128.7x203.22mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA BambuLab Matte Scarlet Red Transmission Distance: 2.2
PLA Geeetech Yellow Transmission Distance: 8.8
PLA Kingroon White Transmission Distance: 5.8
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.68mm) swap to Scarlet Red
At layer #11 (0.92mm) swap to Yellow
At layer #14 (1.16mm) swap to White
At layer #23 (1.88mm) swap to any color of your liking (i chose red) to flesh out the katakana