Creality Space Pi Dual Spool Dryer Mount - Free 3D Print Model

Search models, users, collections, and posts

Skinward

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 30% infill

Designer

13.1 h

2 plates

4.9(31)

Open in Bambu Studio

Boost

207

670

443

180

Released

Description

This is a mount for the Creality Space Pi dual filament dryer, although it could be used for other purposes. It was modeled to fit on the AMS Riser V2 by maCyo42. I printed the mount itself with the settings in the 3mf file, and for the base plate I switched to 15% rectilinear infill. This is my first model so any suggestions please feel free to let me know so I can further improve on the design.

Comment & Rating (56)

@user_896983871

Good on Ya. A few weeks ago I was looking for this exact thing. No luck. Made my own. Was gonna post, but you got it covered.

@mlwells

please post your version that you created as well.

@zhakryuu

I would like to download your version as I wanted one that sits higher and takes less material. are you going to upload it? If not could you send it to me?

@user_2893520091

Replying to @zhakryuu :

I would say ditto!

@zhakryuu

Nice idea! I think there is a lot of excessive material here. Would you be willing to provide step files so I can edit the model and take away some stuff to make it cost less material? as a starter the plate doesent need to be that thick and could all together be removed if proper brackets are made to hold stable. Hit me up in my dms if you wish! Thanks!

The designer has replied

@Skinward

Sure, I will upload them this evening

@user_2893520091

Replying to @Skinward :

Thank you!

@smorin

Any progress on this project? Interested, also hoping for the left side option.

@flyaway19999

Boosted

good job. much better than the other model that's on makerworld for the space pi. this one the weight is much better distributed. the only thing I tweaked was a few of the supports settings and like someone had said in the comments I added a negative in the middle to save some filament. printed in polymaker petg

@OzzieRenegade

i like your set up, can you share some pics of how you have connected the space pi to the printer? thanks

@ScrappyCoon

Print Profile

0.2mm layer, 2 walls, 30% infill

looks perfect :)

@Cowgoesmoo

Boosted

Print Profile

0.2mm layer, 2 walls, 30% infill

printed perfectly. make sure to increase the support interphase for easy removal. Happy overo

@user_950225518

Boosted

Print Profile

0.2mm layer, 2 walls, 30% infill

@develops_relics

Boosted

Print Profile

0.2mm layer, 2 walls, 30% infill

It fits, it holds the dryer fine. But also you should absolutely cut a hole out of the middle of the base plate, it's completely unnecessary for it to be solid all the way through. I put a giant sphere with a negative part modifier over the middle of it with the slicer.

@strikerx22

Print Profile

0.2mm layer, 2 walls, 30% infill

supports could use some tweaking to make them easier to remove. Model is great though

@Jester1x

Could you tell me how far from table to bottom of mount? 🙏 Trying to see if it will fit me setup bc I desperately need this. looks like a little above the logo.

The designer has replied