Swirl Pendant Lamp Shade E27 Vase mode - Free 3D Print Model

Search models, users, collections, and posts

MNehm

Household>Decor

IP Report

Print Profile(3)

All

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

P1S

P1P

X1 Carbon

X1E

0.12mm layer, 1 walls, 0% infill Vase Mode

Designer

5.4 h

1 plate

4.8(84)

P1S/X1C 0.12mm layer, 1 walls, 0% infill Vase Mode

5.3 h

1 plate

4.5(38)

0.8mm nozzle, 0.24mm layer, 1 walls, 0% infill

4.7 h

1 plate

Open in Bambu Studio

Boost

1660

4202

162

136

2.5 k

1.2 k

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

List other parts

E27cordset x 1:

Description

Modern organic designer lampshade.

About 25 cm in diameter

0.5 mm wall thickness

0.12 mm layer height.

I tested this at a 0.2-layer height but had a failure. My Bambu Lab A1 could not handle the overhang with 0.2 layer height. But 0.12 came out beautifully. It's worth the extra time.

Here, it is printed in Bambu lab PLA Basic Beige.

It also prints well in Basic White, Matte Ivory White, and Matte Desert Tan.

42 mm opening for a standard E27 mount. For example: Ikea cord set HEMMA https://www.ikea.com/se/en/p/hemma-cord-set-white-10386577/

Boost Me (for free)

A great way to show you liked the design!

Comment & Rating (162)

@natisbetta

Do you know what the solution to this problem is?

The designer has replied

@MNehm

I had som quality issues that got better when I lowered the speed. It did not look exactly like yours though. But it might be worth it ty try to make all the speeds and accelerationens half. Big thinwalled or vase mode models can start to wobble as they get higher. Reducing the speed reduces the wobble.

@Krew

Boosted

Hi, it may be related to extrusion. I saw such a problem/solution explanation on the bamboo wiki page. I couldn't remember the solution because I hadn't encountered it before.

@natisbetta

Replying to @Krew :

I reduced the print speed and it turned out there was a problem with my fan, so I replaced it and it’s fixed

Show original

@user_3862995764

Print Profile

P1S/X1C 0.12mm layer, 1 walls, 0% infill Vase Mode

Print has some holes here and there, also light doesn't shine evenly throughout. Wouldn't recommend waiting 6 hours for this.

The profile uploader has replied

@sinalco

Boosted

Which film did you use?

@user_3862995764

Replying to @sinalco :

Bambu Lab Matte PLA Dark Blue

Show original

@sinalco

Boosted

Replying to @sinalco :

I use Bambu Lab Matte PLA White

@Dreamteam.2019

Print Profile

P1S/X1C 0.12mm layer, 1 walls, 0% infill Vase Mode

(Edited)

Other Issues:Unfortunately, I have several problems with the lines From the middle, they are flawed, and towards the end, the same problem reappears Otherwise, the result would be great So now I have printed it 3 times, even with dried Bambu PLA filament, and still the same result 300 grams of PLA wasted Such a shame

The profile uploader has replied

Show original

@sinalco

Boosted

You need perfect try material. I recommend to use original BambuLab Matte PLA. And dry it some hours before you print

@Dreamteam.2019

Replying to @sinalco :

I used original Bambu PLA I will try again I have 10% moisture in my AMS

Show original

@asmundstavdahl

Replying to @Dreamteam.2019 :

Your filament can be moist even if the AMS is not. Drying some more is never a bad idea.

@Natamaker

Boosted

Muy bonita

The designer has replied

@MNehm

Looks great!

@Natamaker

Boosted

Replying to @MNehm :

Dual version

Show original

@sinalco

Boosted

Excellent design, prints well

(Edited)

Show original

@Mehmet.cumba

Sehr schön

@Tarzinol

Boosted

Print Profile

P1S/X1C 0.12mm layer, 1 walls, 0% infill Vase Mode

Perfect! I printed the lamp in translucent Blue-Violet PLA+. Printed flawlessly at normal speed

(Edited)

Show original

@user_3100047422

Boosted

Print Profile

P1S/X1C 0.12mm layer, 1 walls, 0% infill Vase Mode

It printed smoothly in PETG as advertised. very beautiful design and it will be making my kitchen more cheery. I used metallic green from flash forge. here’s a boost thank you very much. I have one more pendant to go.

@user_2687771973

Print Profile

P1S/X1C 0.12mm layer, 1 walls, 0% infill Vase Mode

It's exquisite

Show original

@user_4003108464

trgrfrfool

@user_1397808685

Print Profile

0.12mm layer, 1 walls, 0% infill Vase Mode

awesome design. beside the irritations at the last 500 lines totally Impressed how it came out. thanks and happy new year

@Abatele

Superrr

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

The striped swirl lamp

SoDR

28.7 k

11.8 k

The Swirl lamp E27

T.H Made

4.4 k

2 k

Pendant Lamp Shade

Ikigaiform

2.2 k

1.3 k

Pendant Swirl Lamp – Vase Mode

Sebbe