David S. Pumpkins SNL Tom Hanks HueForge

***Scale to 85% to fit the A1 Mini

The layer transitions are already inserted, you will see them once you slice it.

Hueforge settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x138.83mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Elegoo Black Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 7
PLA Elegoo Gray Transmission Distance: 5
PLA Elegoo White Transmission Distance: 5.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Orange
At layer #17 (1.44mm) swap to Gray
At layer #22 (1.84mm) swap to White for the rest.