Eufy S340 Rain Hood - Free 3D Print Model

Search models, users, collections, and posts

Markara

Tools>Gadgets

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill, Gyroid, Tree Slim Supports

Designer

5.1 h

2 plates

5.0(26)

Open in Bambu Studio

Boost

106

341

457

267

Released

Description

Simple weather hood for Eufy S340 PTZ camera. Hood is secured with M3 hardware supplied with camera (if not mounting the solar mount). If using the solar mount on top of camera you will need longer M3 screws (I used M3 x 8, M3 X6 will probably work as well).

Hood fits loosely over the body and has slot on top for mounting. Does not cover the mic/speaker and has a hole for the LED on front.

Suggest printing in black using PTEG, ABS or ASA. MF3 file is set for PTEG and slim tree supports.

I also printed this in white, but this caused issues with the night vision and the IR reflecting back on the camera. If you want white I suggest painting the underside of the brim black or try the .step file with smaller hat rim. This may help the IR issue, but I have not tried that version in practice.

Comment & Rating (39)

@Solcutter

Brilliant thanks, not instllaed yet I only had white PETG so I painted the inside with a special black paint that absorbs over 99% of light hopefully this will help with the spot light reflection

The designer has replied

@Markara

Looks good, great idea on the paint!

@mehxos

Print Profile

0.2mm layer, 3 walls, 15% infill, Gyroid, Tree Slim Supports

I had to scale it a bit for my Eufy E30

Show original

@garadactyl

What did you scale it to for your E30s?

@mehxos

Replying to @garadactyl :

too 103 %

(Edited)

@mehxos

Replying to @garadactyl :

the small hat rim

@jcandthewires

Print Profile

0.2mm layer, 3 walls, 15% infill, Gyroid, Tree Slim Supports

This turned out PERFECT. Looks great in Polymaker’s Fiberon ASA-CF! I changed the support to Normal, Snug with 3 top int layers and they popped off like a dream.

@soerenk

Print Profile

0.2mm layer, 3 walls, 15% infill, Gyroid, Tree Slim Supports

Print was okay. Some messy layers at the concavities. But that might have been my petg. Fits very nice . thanks for sharing.

@Bigi3Dagoe

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill, Gyroid, Tree Slim Supports

Perfect fit.

@knobby

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill, Gyroid, Tree Slim Supports

came out perfect thank you I went for the prime and paint in the inside.

@MonkeyDogProd

Great print, Thank you. I did have to go to Home Depot and buy slightly longer M3x16mm (too long) machine screws. M3x12 or 10 should work. Screws that came with camera were too short.