this looks neat. Ive been looking for some kind of icon pack to use on buttons. I'll have a look how to make others

eatoff

jacksonwill

cover

PXL_20241220_205946601~4.jpg

plate_1.png

2024-12-20_f4c92954f16b3.jpg

<ul><li>PLA</li><li>0.2 nozzle</li><li>layer: 0.06 mm</li><li>first layer: 0.10 mm</li><li>no AMS required (print pause after layer 2 of 4)</li></ul>(tested on A1-series-printers)

mid icon "lamp" (for 2x2 switch)

<ul><li>PLA</li><li>0.2 nozzle</li><li>layer: 0.06 mm</li><li>first layer: 0.10 mm</li><li>no AMS required (print pause after layer 2 of 4)</li></ul>(tested on A1 series printers)

small icon "lamp" (for 3x2 switch)

This is a icon label chips “lamp” for the Aqara Opple switch.Used icon library: <a target="_blank" href="https://pictogrammers.com/library/mdi/" rel="nofollow noopener">https://pictogrammers.com/library/mdi/</a>&nbsp;Sizes (all STL attached):<ul><li>mid: (2x2 switches) 25 mm * 25 mm</li><li>small: (3x2 switches) 16,5mm * 16,5mm</li></ul>This chip is intended to be print without AMS (printing needs to be paused after layer 2 of 4).

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models

Icon chip "lamp" for Aqara Opple switch

Print Profile(2)

Description

Comment & Rating (1)

License

Related Models