Filament Swatch Label + Mount for Cereal Dry Box

This project is a filament labeling solution designed to compliment cereal dry boxes.

The project includes a few different models.

Swatch Label

• just under 2.5g of filament
• showcases the filament at different thicknesses (0.20mm, 0.40mm, 0.60mm, 0.80mm, and 1.00mm)
• includes a recess on the front side for accurate placement of a 14x40mm label. I use a Nelko P21 I bought on Amazon.
• 3x1mm recess underneath the label surface for an (optional) magnet to be press fit. I used some random ones I found on Amazon - any 3mm x 1mm magnets should work fine.

Cereal Dry Box Mount

• just under 5.5g of filament
• curved on back side to contour to the shape of cereal dry boxes - I use the Wildone 6 Pack 4 Liter Airtight Cereal Containers from Amazon
• recess along back side to make space for thicker adhesive tape
• if you are experiencing issues with fitting printed swatches into the mount, try increasing the scale of the object by 1-2% in Bambu Studio

Cereal Dry Box Mounting Template

• just under 3g of filament
• print one of these templates to help with consistent, level placement of the mount to your cereal dry boxes
• please refer to photos for an illustration of how to use the template

---

Since some have asked, here is the Nelko Printer Label Template that was used in my pics: https://upload.nelko.net/share_template.html?id=2016915889845710851&b=1&lang=en

I am not positive that template sharing links are permanent, so here is a screenshot and some details…

• Font: Istok-Regular
• Justify: Left
• Auto font size: ON
• Line 1: Bold, Font Size 4.0
• Line 2: Bold, Font Size 2.5
• Line 3: Font Size 2.5