10" Mini Network / Server Rack - Free 3D Print Model

Search models, users, collections, and posts

moose_

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

16.4 h

6 plates

4.5(11)

Open in Bambu Studio

Boost

378

1245

1.8 k

227

Released

Description

Mini Networking / Server / PC 10 inch wide rack.

TP-Link Omada:

OC200 Cloud Controller

ER605 Router

SG2210P PoE Switch / SG2008 non PoE Switch

Dell OptiPlex 3080 Micro

10" Shelf

10" Blank Plate

10u Rack Rails

12 Port Patch Panel

Ethernet Port Cap/Cover

Rack was built with 2x2 lumber and painted.

PC:

ITX02 PC Test Bench Open Frame

10mm Anti Vandal Switch

2 Port USB A Front Panel

1 Port USB C Front Panel

Comment & Rating (15)

@user_3663520259

Boosted

Nice, to m93p have to cut a little of back cube to fit front face

@ZeroPrint

Print Profile

0.2mm layer, 3 walls, 15% infill

I like this rack. I find it inspirational. It does use a lot of screws and nuts. I used the design for nuts and found they would fall out or back out when I was unscrewing things - even when glued in place. I also found the 3-hole pattern a bit limiting. It is a great alternative to the DeskPi rack though!

@chmalu

Print Profile

0.2mm layer, 3 walls, 15% infill

good but blocks hdmi port in my setup. if you plan on using it - shave it off. otherwise its a little to tight, so fitment is snug. feet need to be removed from pc prior to installation.

@user_2718033452

Print Profile

0.2mm layer, 3 walls, 15% infill

Other Issues:There is nothing wrong with the profile settings. However, the rack is not well suited for the SG2210. Due to the securing mechanism, not all ports of the switch can be used because the connections are at the back on this model. Perhaps the height could simply be reduced

The profile uploader has replied

Show original

@moose_

I designed it to be used the other way around, so the ports are on the front of the rack. You can see it in the pictures

(Edited)

@user_4290867260

how to make it wider. like 12-14 inch width

@user_4038488226

what plate is for the Dell optiplex ?

@user_1370357454

Print Profile

0.2mm layer, 3 walls, 15% infill

@eddie.p

Print Profile

0.2mm layer, 3 walls, 15% infill

@rbangloy

Print Profile

0.2mm layer, 3 walls, 15% infill

@bluemach

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.