Eowyn, Shield Maiden Deck Box for Commander - Free 3D Print Model

Search models, users, collections, and posts

JorbleDorble

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.9 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

144

410

184

Released

Bill of Materials

Bambu Filaments

Select all

PLA Matte

PLA Basic

Description

I made this box specifically for the Eowyn, Shield Maiden commander precon. The shield matches the art on the deck box that comes with the precon. It fits 100 single sleeved cards plus tokens with an appropriate amount of wiggle room. The top is screw close and the braid around the circumference provides very nice knurling to ensure the lid doesn't get stuck! The filaments I used are listed in the bill of materials below. The parts are separate in the slicer so you can easily change the color of anything you would like.

Boost Me (for free)

elder dragon highlander

Comment & Rating (13)

@user_746064517

Boosted

I love the design, the top is so pretty. I adjusted the interior to be able to hold a double sleeved deck. Printed everything else all as is and it turned out fab. So excited to show it off.

@Ademarlemma87

Print Profile

0.2mm layer, 2 walls, 15% infill

tremendous design, I adjusted the interior size to hold two standard decks my wife and I play with

Show original

@user_385069684

Print Profile

0.2mm layer, 2 walls, 15% infill

Changed base color b/c of which filament I had enough of, but it's great anyway...

@t.elsson

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Love this… a great addition to my LotR collection

The profile uploader has replied

@JorbleDorble

So glad you like it! Thank you for the review.

@user_1652875755

Boosted

sick bro

The designer has replied

@JorbleDorble

Thanks! Really glad you like it!

@user_3710668238

It's a shame that my double-sleeved cards don't fit 😔

Show original

@Scoop_dog

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@JorbleDorble

Thanks for the review!

@Vegeta_Ble

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_746064517

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@HpWolfcraft

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.