The Shining Twins Hueforge
Print Profile(1)
Description
Boost Me (for free)
I really appreciate the boosts, so if you enjoy or find useful, Please consider boosting me! Thanks.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Yellow
PLA BambuLab Matte Ice Blue
PLA BambuLab Basic Jade White
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to Ice Blue
At layer #18 (1.52mm) swap to Jade White for the rest.
As always if there is something of mine that you like and would like tweaked in someway or perhaps something new created, please send me a message!
License
Comment & Rating (0)