Dremel 8260 Skadis mount - Free 3D Print Model

Search models, users, collections, and posts

HoL1n

Tools>Machine Tools

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

5.8 h

2 plates

4.9(10)

US-Charger Version! 0.2mm layer, 2 walls, 15% infill

Designer

6.2 h

2 plates

4.0(1)

Open in Bambu Studio

Boost

133

154

110

Released

Description

A simple Skadis wall mount for the Dremel incl.. Battery holder and charger holder.

NEW: incl. STEP-File

Have fun :-)

Comment & Rating (27)

@Iantx512

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

I love this Dremel mount but i guess the charger for the 8260 is wider than the 8250 because even though everything else is a perfect fit for the 8250, The charger does not fit securely in between the two openings. Is there any way you could possibly make a alternate version for the 8250 charger? because i love your design and i would love to mount it up on my wall!

The profile uploader has replied

@user_3851176435

Hey @Iantx512, thank you very much. Please send me the dimensions of the charger and i will build one for you.

(Edited)

@Iantx512

Boosted

Replying to @user_3851176435 :

Awesome thank you so much! I didn't see your reply until just now so i bought a caliper and i was going to attempt at altering your design myself but i lack the experience and more importantly i would feel better with you making and uploading the alternate design for myself and others to use because i wouldn't want to take credit for something you did all the hard work for especially since it seems like the only thing that needs to be adjusted is moving that back wall that sits up against the back of the charger just needs to just be moved in slightly closer for the plug of the charger to fit securely. Ill measure the dimensions right now and upload the pictures on here of the measurements. Thanks for helping me out with this!

(Edited)

@Iantx512

Boosted

Replying to @user_3851176435 :

hey man I never got a reply after i sent you those measurements so i was just checking to see if you got them? i understand if you're to busy to make the alterations for the 8250 Dremel charger. just please let me know if you don't got the time so i can try to modify the design myself so i can finally hang my Dremel charger up on the wall as well. lol

@Njoy84

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed without issues and fitted well. Keeps the charger ready to go when needed :)

The profile uploader has replied

@user_3851176435

thank you!!

@Iantx512

Boosted

The measurements i got for the 8250 wall charger as shown in the picture start out with the picture on the top left the measurement i got for the length was at 82.60mm and on the top right the measurement i got for the width was at 52.85mm and i wasn't sure if every single measurement of the prongs that get inserted into the outlet were the same size so i measured that as well included in with the height of the whole charger on the bottom left picture at 48.8mm and on the bottom right picture with just measuring the plastic casing of the outlet without the prongs included in the measurements and i got a measurement at 32.26mm. I do want to mention though this was the first time i have ever used a caliper before and its also a cheap $15-$20 one off amazon so i don't know how precise these exact measurements are but I'm sure they would be accurate enough for the intend purpose of this alteration made for for the 8250 Dremel charger. Please feel free to reach out if you feel like i did something wrong while measuring the dimensions for you or if you need anything else from me to help you alter your design to also be used for the 8250 Dremel as well! Thanks again for the help!

(Edited)

The designer has replied

@user_3851176435

Ahh, now I understand. First of all, thank you for measuring. The problem is the two plug contacts. I used a German plug.I will create and upload the different variants in the next few days. I'm a bit tied up at the moment and will need some time to do this.Thanks again for the support!

@clubbyr8

Worked perfectly for my 8260 except for the plugpack mount. The Australian plug is totally different. Thanks for the design.

The designer has replied

@user_3851176435

Hi @clubbyr8, thank you! I will build it for you. Cone back later.

@MatStone

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Dremel finally well stored

Show original

@_ObiBenKenobi

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect fit Thank you for the design

Show original

@marcelwinheim

Print Profile

0.16mm layer, 2 walls, 15% infill

fits perfectly.

@motionbug

Print Profile

0.16mm layer, 2 walls, 15% infill

@Rocketman1988

Print Profile

US-Charger Version! 0.2mm layer, 2 walls, 15% infill

Had a minor issue with the tool holder, added brim.

The profile uploader has replied

@user_3851176435

@Rocketman1988, Thanks for sharing. I never had this issue. Possible Bed not clean enough or no glue on it?

@Rocketman1988

Replying to @user_3851176435 :

Might have been the orientation...

@user_80700573

Great design just what I needed ... however could you upload the .step files so I can modify to suit and mount on my pegboard with Sy's Peglock.

The designer has replied

@user_3851176435

Hello @user_80700573, my apologies for the delay. I have been extensively traveling these past few weeks. I will upload the .STEP files shortly. Please let me know how it looks then – Thank you! :-) Best regards HoL1n

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.