T-10 Water Toy Gun

中文站：https://makerworld.com.cn/zh/@QYM3D

【T-15 Water Gun】：https://makerworld.com/zh/models/689632

T-10 use the 7.4V water gun kit ，quickly replace the magazine to ensure better fire sustainability

Filament: BambuLab PETG HF

2025.7.18 Update:

1. Add a water pump module, now you can automatically pump water
2. Trigger optimization, softer force
3. The battery compartment is enlarged for easier installation
4. Structural optimization for simpler assembly

Assembly tutorial：

Tips:

1. Default 15 ° tree support
2. The magazine uses 6 layers of walls and 30% cube filling to effectively prevent water leakage
3. If the battery cannot be fully inserted into the battery compartment, please pay attention to organizing the wires.
4. It is best to use PETG to enhance the durability of the trigger.
5. A and B silicone tubes must ensure that the lower end is exposed by 4mm, otherwise it may cause the water gun to malfunction.

6、This model is not waterproof, please do not immerse the gun body in water. If you have waterproof needs, you can use Hot Glue adhesive to fill all gaps.

——————————————————————————————
2025.2.14 Update:

1、2 types of expandable magazines and magazine couplers

2、The handle has a built-in storage compartment that can hold a 7.4V charger

T-10 Water Toy Gun Lite

Tips:
1. Default 15 ° tree support
2. The magazine uses 3 layers of walls and 30% cube filling to effectively prevent water leakage
3. In addition to the water gun kit, an additional 13 M3 * 16 countersunk screws are required, and the switch is fixed with a 1.75mm filament.
4. The T10 Lite version does not require a water absorbing module. You can keep this module for other projects or wait for an upgraded version to protect it
5. Use the included cutter to cut the rubber tube, ensuring that it is exposed inside the magazine well.
6. If the battery cannot be fully inserted into the battery compartment, please pay attention to trimming or cutting the power cord to shorten it.

7、The use of high toughness materials such as PETG and PLA+for triggers can significantly improve their durability.

Assembly video：