Large Tablet Vesa Mount (190mm-270mm) - Free 3D Print Model

Search models, users, collections, and posts

Usof

Household>Office

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 4 walls, 35% infill

Designer

6.4 h

1 plate

4.9(33)

For A1 Mini, Shorter Clamp

Designer

7.5 h

2 plates

4.8(6)

Open in Bambu Studio

Boost

337

823

852

388

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Carbon Steel Hex Nut

M3x20 SHCS Machine Screw (10PCS) - AA040

M3 Socket Head Cap Machine Screws (SHCS)

Bambu Filaments

Select all

PLA Basic

Description

This is a Vesa 100 mount for large tablets. The picture shows a Samsung Tab s9 Ultra. It will support the length in 190mm-270mm range.

The print has 3 pieces on 1 bed. It should be obvious how to assemble it. Please let me know if there are any questions.

Edit: In the images and the previous version, I used threaded inserts. In this version, you can also use simple nuts to mount the VESA plate.

Please be careful with the printed screw not to tighten too much to damage your tablet

I don't accept any responsibility for any damage to your device.

With this design you would need:

M3 screws and gaskets
M3 hex nuts OR M3x5x4 Round Threaded Brass Heat-Insert Nut

I am using Vivo desk mount (https://a.co/d/cFEqNrl) that comes with the back plate for the Vesa mount.

Boost Me (for free)

Comment & Rating (62)

@t0asty910

Print Profile

0.2mm layer, 4 walls, 35% infill

Needed for work so I haven't installed it yet, but everything fits together great so far. I had a failure on the first print but I think it was a plate adhesion issue. Swapped in a clean one just in case and it printed fine. Thanks for posting!

The profile uploader has replied

@usof

Thanks for the 5 star. Hopefully you could use it easily.

@Printer999

I have a smaller tablet and I figured it still works if I flip the tablet to the long side is the one clamped. I heat pressed a larger sized nut. and cut a hole for the cord (I’ll boost when I get more boosts :)

(Edited)

@Eth182

Boosted

Print Profile

0.2mm layer, 4 walls, 35% infill

Works brilliantly after a little clean up. seems strong and holds firmly.

@i_am_min

Print Profile

0.2mm layer, 4 walls, 35% infill

Nice!

@saacman

Boosted

I did not realize that the smaller setting would not fit my tablet until the printing was done, so I had to adapt a hole for the charger manually. It works great, I mounted it on my desk as a temporary second screen.

@user_1988368730

Boosted

Print Profile

0.2mm layer, 4 walls, 35% infill

Everything turned out exceptionally well! The tolerances are amazingly close! It will fill a need that I have exceptionally well!

@Talycito

Print Profile

0.2mm layer, 4 walls, 35% infill

it is pretty solid!!!!

(Edited)

@watson_king

Boosted

Print Profile

0.2mm layer, 4 walls, 35% infill

@Milk_Chewy

Boosted

can I have a profile for the A1 please? 🙏 or someone explain how I can do so. thanks!

The designer has replied

@usof

I just uploaded a new profile that should work with both A1 and A1 mini. I had to shorten the clamp guide to fit on the plate. Let me know if it works for you. I don't have and A1 to test it. Edit: Oh, Actually the original profile seems to fit on A1. I didn't know that. I added A1 to the original profile. You can now print that.

(Edited)

@Milk_Chewy

Boosted

Replying to @usof :

thank you thank you

@user_3793265454

Boosted

Excelent design. Thanks for sharing

The designer has replied

@usof

thanks for the boost. 🙂

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.