Fighter Jet (Multi-color Assembly, No AMS Required, Inertia Drift)

Plates 1-3 can be printed in your preferred color (approximately 3 hours printing time), plate 4 is monochrome

The fighter jet requires minimal supports, making removal very easy! Approximate dimensions are 155*145*80mm (+base height), featuring both a fixed mount and an articulated mount requiring one 683zz bearing (3mm inner diameter * 7mm outer diameter * 3mm thickness)! Install it onto the bearing mounting base (model name in your slicer software)!

The GIF below shows the assembly diagram:

Some model parts may exhibit a tight fit during assembly (due to printer tolerances), requiring slight pressure or filing. Alternatively, download the STL/CAD files to adjust dimensions (Blender format)

Note: 1. Both PLA and PETG can be printed. It's best to understand the characteristics of these two materials before printing to avoid printing failures!! For example, PLA can become brittle if left for a long time or at low temperatures, while PETG has good toughness. Please choose the filament that suits you!!

        2. If it's for younger children, and the parts are small and easy to disassemble, it's better to glue them firmly with 502 or other adhesives to prevent them from being swallowed!!

        3. If there are no special requirements, please do not use your own advanced process settings for printing~ to avoid printing failures!!

If your printd part has local spaghetti, or the filament doesn't stick to the build plate, please recall if you touched that area (hands secrete sweat and oil, touching it has a very high chance of causing spaghetti)  or if the build plate is dirty. The solution is to search online for how to clean a 3D print plate!! If other problems occur, please describe it in the comments section and add pictures, so it's easier for us to solve it~  Otherwise, I can't imagine the situation = =!!