Brick Square Clock - Free 3D Print Model

Search models, users, collections, and posts

3DItaly

Toys & Games>Other Toys & Games

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

15.4 h

9 plates

4.9(52)

0.2mm layer, 2 walls, 15% infill

38 min

1 plate

5.0(4)

hour hand - no support - easy print

12 min

1 plate

minute hand - no support - easy print

15 min

1 plate

Open in Bambu Studio

Boost

920

2008

121

955

370

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Clock Components Kit 011

Bambu Filaments

Select all

Description

Boost Me (for free)

Thank You!!!

Boost Me (for free)

Thank You!!!

Also check out the round dial versionhttps://makerworld.com/it/models/848965#profileId-796500

Beautiful clock made with bricks block

To reduce printing times, I designed the clock in two main pieces, the base and the square crown, then there are the numbers and all the other components that you can print as you like, the pieces are very precise, so they do not require glue or screws, you just have to unleash your imagination and compose your clock.

P.s. Depending on the parameters of your printer, you may need to file the various pieces with a bit of sandpaper.

I also inserted an insert that goes behind the panel, it is used to keep the yellow part firmly in place, you can also put a bit of glue if necessary

There are 3 logos in the profile,
1: with small red dial
2: with large red dial
3: simple logo without dial.

Print the one you like the most

Boost Me (for free)

Thank You!!!

Comment & Rating (90)

@SG80

The needles for this model also do not work with the Bambu kit I do not understand how this model was designed when it is impossible to get the needles to the correct size

The designer has replied

Show original

@3Ditaly

Only you are not working, ask yourself a question

Show original

@SG80

Replying to @3Ditaly :

wow such a great answer!! If you have nothing intelligent to tell to solve issues on the models that are not well done, so don't talk! I am not the only one with issues with the needles. I had to scale it bigger because the hole is not good for the bambu needles.

@3Ditaly

Replying to @SG80 :

It only doesn't work for you, and I'll tell you again, learn how to print before commenting. Thanks

Show original

@schmchri

Hands and logo printed with pla glow

The designer has replied

@3Ditaly

molto bello!!!

@user_1929444302

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Had to reposition the frame in Bambu Stufio and drill out the hands center holes to fit the clock movement, But everything else printed great and looks great thanks.

@user_2714989996

It turned out very good It will look great in my son's room Just wait for the little drill to arrive to connect the hands Thanks

Show original

@umitayyildiz

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

thanks❤️

@andreefuhrmann

Boosted

Nice design. fits great

Show original

@user_3540410029

Boosted

Love this!!!!!

@Dexor

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice design 🙂👍🏽

Show original

@neeshdfeesh

Boosted

Great project. I used a clock kit from Amazon so had to enlarge the holes in the hands a bit to fit the mechanism, but wasn't too hard. Removing the support material from the underside of the Lego pieces was a fair amount of work, especially tricky for the small and thin pieces, but it mostly came out cleanly. I would recommend using a thin metal spudger to make it a lot easier. My only feedback is I wish the Lego logo was one row wider horizontally so it could be properly centred on the clock.

@Markotto913D

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

SUPERB!!!!!

(Edited)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.