Search models, users, collections, and posts
RC Touring Car Side Wall Glue Trace Templates
IP Report
Print Profile(3)
58mm | 0.16mm layer, 2 walls, 15% infill
24 min
1 plate
59mm | 0.16mm layer, 2 walls, 15% infill
24 min
1 plate
57mm | 0.16mm layer, 2 walls, 15% infill
24 min
1 plate
Open in Bambu Studio
Boost
18
32
2
0
47
8
Released
Description
These RC touring car tire sidewall gluing templates are my first attempt at 3d design. Feel free to share your thoughts on improvements / settings etc.
3 sizes are available: 57mm, 58mm and 59mm. The centering post is 4mm diameter and to fit Gravity RC wheels
Trace around the template with a Sharpy marker. Use the marker line as a visual guide and glue up to the line without getting glue on the marker line. Remove the line after gluing with brake cleaner
I print them face down, no supports required and iron the top surfaces
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (2)