Tintin Hueforge

J'ai corrigé la faute d'orthographe, il manquait le S à des.

I've corrected the spelling mistake, the S in des was missing.

Project: Tintin au pays des soviets 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 164.67x235mm in size
You may print at higher layer heights below the Min Depth of 0.48mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 5.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #15 (1.28mm) swap to Red
At layer #17 (1.44mm) swap to Jade White

Border Only Colors from here until the end.
At layer #27 (2.24mm) swap to Red for the rest.