Reximex Mito .177/.22/.25 120mm Sound Moderator 1/2" UNF - Free 3D Print Model

Search models, users, collections, and posts

3DTurtL

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

.177 Calibre

Designer

2 h

1 plate

5.0(13)

.25 Calibre

Designer

2.1 h

1 plate

5.0(4)

.22 Calibre

Designer

2.1 h

1 plate

4.2(6)

Snap fit for daisy powerline 880 /w adapter

2.6 h

1 plate

Open in Bambu Studio

Boost

188

472

654

296

Released

Description

Tested with a relatively low powered air pistol (UK spec). Test safely if using a high powered variant.

½" UNF 20TPI Moderator mainly designed for the Reximex Mito Air pistol but should fit others with a male ½" unf connection.

Requires Reximex Mito Silencer adaptor to fit which takes the mito's thread to ½" UNF. OR a ½" 20TPI Male thread on any other airgun/pistol.

For best fit then you can chase out the threads with a ½" unf 20tpi tap. It will screw straight on as is but may be a little tight. Fit the adaptor first and then the whole unit including moderator onto the pistol.

120mm x 30mm compact design works very well, can still use original ironsights or Red dot.

(May be a little tight on the thread but still screws on fine).

Print's in one piece. Threaded base section flat to the bed.

Random seam position

15% infill

Supports (modified angle of 25) and build plate only to support the bottom recess for the adaptor only.

Comment & Rating (45)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.