TeslaOptronicsTechnology.D.O.O

cover

0-02-05-a311d292cd597e82a96146eafe6e972b64d232fa3f16effa9100b47384f2d628_4b4c05bc95d4685b.jpg

0-02-05-a311d292cd597e82a96146eafe6e972b64d232fa3f16effa9100b47384f2d628_4b4c05bc95d4685b_(1).jpg

0-02-05-df444b7ae3dc5617cde687dd0a9a9f32bd65d749f0a4003a0316337acbac50aa_d5b58bd4b43ca31b.jpg

0-02-05-035d0087c559730a18a91a4e91a693ccf033f917710e8a6e81aea31c42bbaa2a_2fcf7416faa6f101.jpg

0-02-05-216ab4d4d7cf794fd0c81be468e182a3d8f9ddf20ae15d544367848add69a1e5_aa68a921b12f1d7b.jpg

0-02-05-38d73c83991bc54a593eaa353f2b1092d72e098dca997c94fe89c39d743c552d_2e9dbf42d69b1a2c.jpg

plate_1.png

2024-12-18_5a8253482cb2b.jpg

For optimal printing of this file using generic PETG without supports and ensuring good quality, follow these guidelines:<ul><li>Layer Height: 0.2mm (standard quality)</li><li>Wall Thickness: 0.8mm (2 perimeters)</li><li>Infill Density: 15-20% (grid or gyroid recommended)</li><li>Print Temperature: 230-250°C (adjust based on your filament's specifications)</li><li>Bed Temperature: 70-80°C</li><li>Print Speed: 40-50mm/s for better surface finish</li><li>Cooling: 50-70% fan speed (adjust to avoid warping while maintaining layer adhesion)</li><li>Adhesion: Use a clean PEI sheet or apply a thin layer of glue stick if needed for better adhesion.</li></ul>These settings should provide a balance of strength, dimensional accuracy, and surface quality. If needed, fine-tune based on your printer's performance. ty

0.08mm layer, 2 walls, 15% infill

I used the BambuLab X1C and P1P to print this file. If you&#39;re experiencing parts that don&#39;t fit tightly, try increasing the contour compensation by around 0.02mm, and it should work fine. I printed it with ASA CF, but you can also use PETG or PLA. and for asa cf slow down machine.

HP Elite 8200 IO shield

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models