Search models, users, collections, and posts
d6, d10, and d100 Bullet Dice
IP Report
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
Designer
5 h
3 plates
0.2mm layer, 2 walls, 15% infill
2.3 h
1 plate
Open in Bambu Studio
Boost
26
61
2
2
53
19
Released
Description
Some custom die that I modeled up in SolidWorks for some of my friends Cyberpunk 2020 games. The d6 is based off 9x19mm, the d10 based off .50 Beowulf, and the d100 loosely taking inspiration from the Russian 14.5mm. I am not positive if they are balanced, but these are just some fun die to use.
I would encourage you to print using a .16mm or lower layer height to give the numbers as much clarity as possible. Also, please make sure to use a brim for the taller die. I have not tried these on the SuperTak but they do tend to come loose on the standard Textured PEI sheet
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (2)