Search models, users, collections, and posts
Dragonfly (flex, print-in-place)
IP Report
GIF
Print Profile(4)
0.2mm layer, 4 walls, 10% infill
Designer
2.5 h
1 plate
Dragonfly loose joints
Designer
2.4 h
1 plate
Bambu PLA Basic 0.2mm layer, 4 walls, 10% infill
Designer
1.9 h
1 plate
For A1mini, 2plates, Use Bambu PLA basic(Need flow dynamics)
2.6 h
2 plates
Open in Bambu Studio
Boost
497
1092
167
51
1.6 k
902
Released
Description
This is my dragonfly.
I designed it for the MakerWorld Flying Objects Design Contest.
Make sure to watch the short GIF in the modelpictures.
After print, just rotate the head and tail into place, push the wings into the inner joints, and put the model on the stand.
Enjoy!
Update:
I added the “Dragonfly loose joints” profile (red Dragonfly picture).
Use this profile, if your head and tail joints are too tight!
I designed it with more space between the joints.
Have fun!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (167)