8 Way and 4 Way steel terminal block covers.

This is small-ish termal block holder set designed to hold the all steel 2x4 way and 2 x 8 way termal blocks as sold by Screwfix and most electrical oulets as earth connectors. I use these not just for eaths but for multiple connections to phase also. You therefore need a means to isolate and mount these for the live conductors.

These come with lids/caps and the steel terminal blocks are a tight push fit into the base.

I usually stick some double sided tape on the undestide to secure the base to the back-panel and then scew/bolt from the lid all the way through to the back plate/mounting board.

I also lke to use these as a means to ensure a good connection by ensuring each conductor is captured by the two screws when fed from the one side.