Print Profile(2)
Bill of Materials
Description
Available in both 20 and 40 degree versions!
This is a desktop stand for a Wisecoco 14" 2.5K touch screen monitor. It may fit other monitors as the chassis design (rectangle screen with the square electronics housing) is used by a few manufacturers.
It's slightly over-engineered but as this is designed for a touchscreen the supports are beefed up. It holds the monitor at a 40 degree angle and 10mm off the surface, which I found ideal for positioning under my main ultrawide. There is ample clearence for both USB-C connectors and the mini-HDMI. THe 40 degree angle gives a slightly more relaxed angle. The model has been adjusted to allow the M4 bolts to be tightened using a screwdriver through the base.
Mounts simply with 4 M4 screws, I used M4x8mm pan heads (the mounting holes are 6mm to allow for manufacturing tolerance so a washer might be required depending on your screws). Optionally add some rubber feet to prevent it slipping depending on your desk surface.
Prints easily without issue, I used tree supports for the upper mounting brace to keep the finished model clean. I printed at 0.08mm layer height as I had the time and wanted a smoother finish as it's in front of me all day. 0.2mm layer height should be fine as well.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)