Fabs8819

cover

TopHeart.jpg

IMG-20241218-WA0003.jpg

plate_1.png

Supports sind angepasst0,2mm Schichthöhe40% Fill&nbsp;

Supports are adjusted0.2mm layer height40% infill&nbsp;

0.2mm layer, 2 walls, 40% infill

tennerjoe

WhatsApp Bild 2025-04-18 um 12.30.34_f45a10e1.jpg

WhatsApp Bild 2025-04-18 um 12.30.41_6c36692b.jpg

!!!AMS erforderlich!!!Ich habe hier das Modell für 2 Farben abgeändert.Die Schichthöhen sind Adaptiv angepasst, um eine glattere Oberfläche zu schaffen.Nach dem Druck habe ich das Objekt noch abgeschliffen und abgeflammt.&nbsp;Zudem habe ich die Gravierung mit glow in the dark gedruckt.Ich habe im Liegen und mit Stützen gedruckt, um die Farbwechsel zu minimieren.&nbsp;

!!!AMS required!!!I have modified the model here for two colors.The layer heights have been adaptively adjusted to create a smoother surface.After printing, I sanded and flame-polished the object.&nbsp;Furthermore, I printed the engraving with glow-in-the-dark filament.I printed it lying down and with supports to minimize color changes.&nbsp;

2 colors 0.2mm layer, 3 walls, 40% infill

MrBill700

IMG_9453moana.JPG

Reduced infill and added three wall layers. I made this for A1 Mini after the original failed multiple times.

0.2mm layer, 3 walls, 20% infill

PXL_20250406_081708638.NIGHT~2.jpg

PXL_20250406_051943116-EDIT.jpg

PXL_20250406_045609551.jpg

Four color version, I used:&nbsp;Bambu PLA Matte GreenBambu PLA Matte BlueBambu PLA Glow BlueBambu PLA Sparkle Yellow&nbsp;Because of the waste the profile includes two on the same plate, just remove one if you don&#39;t want it :)&nbsp;The objects are tilted on the buildplate to get a more optimal speed/quality ratio, this means that there are quite a lot of supports that needs to be removed, but the end result is worth it.

Colored 0.12mm layer, 3 walls, 20% infill

mjrdcrker

IMG_4194.jpg

Uses less filament and also uses Gyroid infill which causes less noise.

0.2mm layer, 2 walls, 15% infill

ripeimages

594542957_1649368736026329_2311999077353500277_n.jpg

595265235_1191833255815824_1116515782135395711_n.jpg

i wanted to have the back of it cleaner and with no supports.  split it into 2 parts and used square dowels to align things.  the dowels might be a bit long if you cant get them in all the way, but feel free to cut them and leave them long enough to align everything while also using some glue.   even with .16mm layer height the print time is less than 2 ½ hours now. :)  hope this helps!

0.16mm layer, 2 walls, 10% infill

Moana Power

CHiTO316

IMG_0946.jpeg

IMG_0945.jpeg

IMG_0943.jpg

I&#39;ve created a new Print Profile for my Overture Glow-in-the-Dark TPU 95A Filament and have made several improvements to it.-0.2mm Layer (0.16mm profile)-3 Walls (from 2 previously)-15% infill (down from 40% originally)-Improved Support Settings to correct previous issues.&nbsp;This new print profile is set for TPU, but you can change it to whatever filament you want to use. I&#39;ve lowered the infill percentage because 40% was completely unnecessary, and balanced it out by adding an extra wall (3 walls now). Almost everyone had issues with the model falling off mid-print, which was due to the use of thin tree support. I&#39;ve changed it to Manual Tree Support and added some manual supports to help stabilize the model to prevent it from falling off again. The model printed perfectly fine, even with TPU, so feel free to use it yourself.

Improved Profile - Better Supports

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Moana - Heart of Te Fiti with Holes for Necklace

UPDATE:HIER die Version ohne Löcher:&nbsp;https://makerworld.com/de/models/1030393#profileId-1013089&nbsp;&nbsp;Ich war auf der Suche nach einem Modell für meine Nichte.Dabei habe ich das hier gefunden, ich hab es über Bambu Studio mit Variablen Layern bearbeitet was die Qualität deutlich verbessert hat.Das Infill ist auf 40% da es bestimmt beim spielen einiges aushalten muss.&nbsp;&nbsp;Die aktuelle Version hat mehre Stützen, so dass der Druck besser funktioniert&nbsp;Viel Spaß&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Vielen Dank </boostcontent></boostme>

UPDATE:Here is the version without holes:&nbsp;https://makerworld.com/en/models/1030393#profileId-1013089&nbsp;&nbsp;I was searching for a model for my niece.I found this one, and I enhanced it using Bambu Studio with variable layers, significantly improving the quality.The infill is set to 40% as it needs to withstand considerable play.&nbsp;&nbsp;The current version incorporates multiple supports for improved printing success.&nbsp;Enjoy!&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you</boostcontent></boostme>

Print Profile(7)

Description

Comment & Rating (393)

This remix is based on

License