Ancient Style Taihe Hall

Original miniature Taihe Hall, hope you like it

Features are introduced below

Printing:Adopts split printing to maximize detail retention. A total of three plates are printed: one for the main building, one for the roof, and one for the base

Support:Uses the built-in file method for printing, requiring no support

Color Matching:The roof uses black, the building uses coffee color, and the base uses white. The effect is good, but you can also use your own imagination, which may have a miraculous effect

Play:1.Suitable for desktop ornaments and water tank landscaping, landscaping without asking others. We also look forward to everyone developing new usage methods. 2.The building part can be used alone without the base

Compatible Models:This work uses 40% scaling, and I have also tried 50% scaling, which makes it more magnificent. If you are interested, you can try scaling it up by percentage.

Installation Method:Video introduction:

This Bilibili video cannot be reviewed and approved here. If you need the installation video, you can find it here.

All the holes are pre-drilled, and most of the parts can be directly inserted. For a tighter fit, you can add some glue

Detailed three steps: First, install the upper and lower two layers of the house and the two roofs directly into the reserved holes. Second, for the white base of the hall, connect the steps and the base first, add glue to fix them, then glue the base support to the bottom of the large base: Third, connect the two parts according to the reserved grooves.

My other works:

Double-decker viewing building

https://makerworld.com.cn/zh/models/664645#profileId-608314

Ancient style double-decker stilt house

https://makerworld.com.cn/zh/models/688600#profileId-636355

Summary:

I spent a lot of time on the base of the hall this time. I tried many times to improve the success rate of printing, so that everyone can save time and worry when printing. In the future, I will try to make Yueyang Tower or Tengwang Pavilion.