Tom and Jerry Wall Hole (4 color ams compatable)

This is a recreation of https://makerworld.com/en/models/156297#profileId-185383 that was redesigned to support a 4 color ams and dramatically reduce color changes. you'll need to perform a couple manual color swaps. When slicing, drop a pause on the first multi-color layer without black, and another on the first layer when black starts being used again towards the top. When the first pause gets hit, you'll need to swap black for white. Unfortunately, the Black will be loaded into the AMS so you'll need to wait. Press continue, let black print in the eyes and nose instead of white, and then once the printer performs a color change, swap black for white. There will be several subsequent layers of white where the black incorrectly printed so it won't matter that the color was wrong. Finally, at the next pause, swap the white back to black.

To dramatically reduce the number of color swaps, the white boarder can be printed on a separate plate. You'll need to glue or tape it together later.