Search models, users, collections, and posts
Gloomhaven - Water - 2 Hex
Remixed by
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
26 min
1 plate
Open in Bambu Studio
Boost
6
30
0
0
18
9
Released
Description
This is a HueForge remix of https://www.thingiverse.com/thing:2838980
Project:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.1x64.863mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Marine Blue
At layer #6 (0.56mm) swap to Ice Blue
At layer #11 (0.96mm) swap to Jade White for the rest.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)