HueForge - City V2 Skyline, Night, Sunset, Traffic
Print Profile(1)
Description
I am open for further HueForge suggestions and inspirations.
If you have ideas or wishes just write me.
Important note: You have 3 possible printing options:
Option: If you want to print it in the original version with 5 colors like me, you have to remove the black filament roll after thisone is finished and insert a yellow one into this slot. But before printing you have to change the yellow area (Layer #17) in BambuStudio to black! This means you have to slice the model with 4 colors, but you will use 5!
Option: You can also print the model with only 4 colors. just remove the color in layer #17 in BambuStudio
- Option: You can also print the model with only 3 colors (Black / BlueGray and White). Just remove the colors in layer #15 and #17 in BambuStudio
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x114.29mm in size
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Orange
At layer #17 (1.44mm) swap to Yellow (with AMS: only possible with option 1 by using the same slot with different color)
At layer #18 (1.52mm) swap to White for the rest.
Boost Me (for free)
Your support through a boost is greatly appreciated and contributes directly to the development of future design projects Thank you
Membership
if you want to sell my models do not hesitate to get a commercial license
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)