The Beast
Print Profile(1)
Description
Project: LEON.hfp
Print at 100% infill with a layer height of 0.08 mm and a base layer of 0.16 mm
The model is 120x214.17 mm in size.
You can print at higher layer heights below the minimum depth of 0.48 mm.
The maximum depth is 2.8 mm and the actual depth is 2.9 mm
Filaments used:
Bambu Lab PLA Basic Black Transmission distance: 0.6
Bambu Lab PLA Basic Blue Gray Transmission distance: 3
Bambu Lab PLA Basic Orange Transmission distance: 7
Bambu Lab PLA Basic Jade White Transmission distance: 5
This print uses 4 unique filaments.
Swap instructions:
Start with black
At layer #7 (0.64 mm), change to blue gray
At layer #11 (0.96 mm), change to orange
At layer #19 (1.6 mm), change to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)