Meater Pro/2 Plus wall mount and stand

The Meater Pro/2 Plus is equipped with two magnets on the back of the dock, which is super handy! However, since my BBQ station is entirely made of wood, I didn’t have a suitable spot to attach the Meater. As I couldn’t find a quick solution, I decided to design something myself.

The result is a wall mount with integrated magnets, allowing you to easily attach and detach the Meater. I also created a protective cover to further safeguard the Meater. The wall mount can be easily installed using the two screw holes. The cover has enough tolerance to make it easy to attach and remove without pulling the Meater along with it.

As a bonus, I designed a stand so you can comfortably place the Meater while cooking.

The magnets I used are 5x3mm. Both the wall mount and the stand use two magnets each, so if you want to make both, you’ll need a total of four 5x3mm magnets.

To add the magnets, you’ll need to set a pause in the slicer just before the hole is sealed. At a layer height of 0.2mm, this corresponds to:

• Layer 18 for the wall mount
• Layer 20 for the stand

The Meater logo and text were added via the slicer.