REMIX THOUSAND SUNNY 150% WITH CANON_MODE

Greetings to all One Piece fans

This model is a remix of @HAALAND's model

I greatly enjoyed his model

It is excellent and quite easy to assemble, but I felt it lacked certain details, which I have added in this remix

I also managed to simplify certain parts of the model to minimize purging and save printing time

Dual Mode

The size is scaled up by 150% compared to the original model

If you reduce this size, some parts may not display all the details, such as the cabin windows (unless you change the nozzle to a 0.2 perhaps? I stayed with 0.4)

Height with base: 44cm. Length 40cm. Width: 15cm at the hull of the ship, 25cm at the sails

Optimized Parts:

The multicolored cabin roofs have been simplified for printing

Modeling of all doors and windows in the model allows for significant gains in printing speed and purge savings

Addition of lanterns on the rear cabin

Addition of mandarin orange trees on the ship's grassy area and on the upper balcony

Addition of the base, which has been modified to fit the Sunny

Modification of the bowsprit:

-Size of bones and Sunny increased

-Addition of 2 mouth options for Sunny: Normal mode or Roar_Cannon mode

With a metal washer (20mm diameter and 1mm thickness) and magnets (10mm diameter and 3mm thickness), they can be interchanged as shown in my model

Modification of the black line on the rear of the ship's hull to insert circular inserts (portholes)

Modification of the front railing with the addition of the spiral part

Modification of the red and white part at the front of the ship to allow printing of the separate yellow round parts

Addition of 2 new Sunny paws: 1 version closer to the anime and one more cartoonish version

Modification of the rectangular cabin to simplify printing and addition of doors and windows

Addition of a pirate flag: To hang it, I cut a small part of the circle with pliers and then attached the circles to the flag. I heated the circles to manually adjust them to the mast

Addition of trees on Deck 3, which I have restored to a grassy mode. With the addition of a trapdoor, doors, and windows

Addition of the aquarium door on the upper deck (Deck 4)

And other modifications…

I hope that those who are interested in this model will enjoy it

Happy printing!