Hot Wheels Track Clamp Remixed by HarleyCodes

Remixed by

HarleyCodes

Toys & Games>Other Toys & Games

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

PEI Plate - 0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

4.9(75)

Cool Plate - 0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

244

361

568

Released

Description

This is a remix on https://makerworld.com/en/models/25035 made by JonathanLevi.

In this remix:

- I have simplified the geometry as it was causing some print issues.

- Orientated the track connector so that its rotation is aligned with the rest of the geometry

- Reversed slope of track connector, allowing better bed adhesion and eliminate need for support material.

Uploading both Cool and PEI plate profile so you can print from BambuHandy no fuss.

Change Notes:

Wall loops increased to 4, and infill pattern changed to Gyroid.
There was an issue with splitting under load, as a result of the layer direction.
The direction can't be changed, but can be strengthened.

Comment & Rating (89)

@kitqnxqxp

Print Profile

PEI Plate - 0.2mm layer, 2 walls, 15% infill

Perfect print without tweaking! My son had a blast playing with it.

The designer has replied

@HarleyCodes

Nice dude 😀 Should you have any issues, I have uploaded a new profile which should strengthen it in general.

@ToyotaMan

Print Profile

Cool Plate - 0.2mm layer, 2 walls, 15% infill

Great print profile! Came out perfect

@schiggy

Print Profile

PEI Plate - 0.2mm layer, 2 walls, 15% infill

Nice fast Print.

@lgugamedeiros

Very good, I liked it!

@Kurupt

Print Profile

PEI Plate - 0.2mm layer, 2 walls, 15% infill

perfect, A1 mini

@SickCrazyEyes

Print Profile

PEI Plate - 0.2mm layer, 2 walls, 15% infill

Great print! Awesome to help make the track exiting

@Muffinhead

Print Profile

PEI Plate - 0.2mm layer, 2 walls, 15% infill

Looks good!

@JurjendeVries

Hi @HarleyCodes , thanks for providing this nice track clamp. I printed it twice, once with Bambu blue PLA and once with Bambu black ABS on my P1S. Both had issues. When I try to connect the hot wheels track / road part, it is too stiff / there is too much resistance. Both resulted in broken 3D prints. Any idea what I am doing wrong. Should I use some other settings or use another material? Thanks in advance for your help.