nozzle wiper catch + hotbed cable relief - Free 3D Print Model

Search models, users, collections, and posts

1P50

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

49 min

1 plate

5.0(7)

Open in Bambu Studio

Boost

Released

Description

I've started from the great model from @kongkoka, adding a clip that snaps directly into the screw hole of the heatbed, reinforce the structure to keep the hotbed cable away from the print head in a natural way, the hole was just for saving some material but i'm thinking on using it to create a cable lock of some sort.

hotbed

cable holder

Comment & Rating (20)

@WildVapor

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent, a perfect fit

The profile uploader has replied

Show original

@1P50

thank you!

@CatOfUlthar

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Great! Thank you. Works really well.

The profile uploader has replied

@1P50

thanks there still some room for improvements though

@flowlabstudio

I made the report to Makerworld! This is a remix of my model. It is not allowed to do so

The designer has replied

@1P50

Before submitting a report, you could have contacted me privately. I sought permission from the individual I believed to be the original creator (always cited in the descriptions of both V1 and V2). Furthermore, considering I don't see the original among your uploads on MakerWorld, this all seems rather impetuous, wouldn't you agree? It's not as if there are millions in copyright at stake, after all 😁 I will await communication from Bambu Lab explaining my reasoning, and then I will remove it if necessary

Show original

@flowlabstudio

https://makerworld.com/models/460662

@1P50

Replying to @flowlabstudio :

And where would you see this striking resemblance, I'm sorry? They are two completely different things, my dear friend 🤣

Show original

@user_944323650

Print Profile

0.16mm layer, 2 walls, 15% infill

@marco_manelli

you know by putting a hole you are actually adding material because of Wall thickness?

The designer has replied

@1P50

You are right

Show original

@b1nk

Print Profile

0.16mm layer, 2 walls, 15% infill

let's hope it helps keeping it clean

The profile uploader has replied

@1P50

actually the whiper tray doesn't take that much poop but the cable stays down compared to not having it

@Cire4492

Print Profile

0.16mm layer, 2 walls, 15% infill

printed the wrong one but i made someone happy

The profile uploader has replied

@1P50

😂

@systematiq

Print Profile

0.16mm layer, 2 walls, 15% infill

The print came out great, but the design is for the older A1 model. The newer A1 comes with cable strain relief built in, but the extruder head rubs every time the nozzle goes through the cleaning procedure. I came up with my own remix of this to help keep the cable relief from being hit by the extruder head during nozzle cleaning. Thank you for sharing.