Hextraction Seawall

Block and fill the gutter using the Seawall tile for Hextraction!

Seawall's wall is the trigger zone - when triggered, you'll plug the hole that ball went through with a random tile from the pool. Note, according to the default wording of these rules, if the ball falls into the hole from itself it doesn't overwrite itself with a new tile. At high enough speed the ball can make it through the straight channel, but typically this will serve as a trap for passerby.

Rules Card Text

Trigger: Spawn a tile in the empty slot this ball fell in.

Printing / Assembly Instructions

• Print the wall, bottom tile piece, and top tile piece.
  • I had a little bit of stringing in the bottom model, I might recommend a tiny bit of support under the middle ring overhangs.
• Click fit the wall into the bottom with the star side facing up so it is visible from above when closed.
• Glue the top tile piece to the bottom, and you're done!
• For the rules card, if printing with multi-material: drag both the base and detail STLs into your slicer simultaneously, loading it as one object with multiple parts, just like the lid. Assign filaments as desired. A single piece STL is also provided.