BookMark_LeaningTowerOfPisa_Hueforge
Print Profile(1)
Description
Boost Me (for free)
The Leaning Tower of Pisa is a famous Italian landmark, known for its unique tilt.
The tower is built in Romanesque style, consisting of eight levels, each with arched windows and intricate carvings. Its white marble facade glistens under the sun, adding to its grandeur. Visitors often take amusing photos, pretending to "hold up" the leaning tower, as if defying gravity itself.
The Model is 60x180mm in size
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 60x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #13 (0.68mm) swap to Blue
At layer #18 (0.88mm) swap to Ice Blue
At layer #22 (1.04mm) swap to Orange
At layer #30 (1.36mm) swap to Yellow
At layer #41 (1.8mm) swap to Jade White for the rest.
Welcome to view my other bookmarks
LANDMARKS:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)