Version 2.0 Twelve-in-One Fidget Toy Set - Free 3D Print Model

Search models, users, collections, and posts

YEZAO

Toys & Games>Other Toys & Games

IP Report

Print Profile(9)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Single-plate version, one-plate printing, incredibly convenient, print with a single tap on your phone (reinforced 1.0)

Designer

3.2 h

1 plate

4.6(2.2 k)

Multi-plate printing for easy color matching (logo-free version) (reinforced 1.0)

Designer

3.3 h

2 plates

4.6(316)

Multi-plate printing, facilitating color matching (reinforced 1.0)

Designer

3.4 h

2 plates

4.6(156)

Faster Print, AMS, Dual color, No Logo

2.7 h

1 plate

4.6(156)

Click to see more

Open in Bambu Studio

Boost

12813

29335

3424

1.9 k

55.2 k

32.8 k

Released

Description

Content has been automatically translated.

Show original

An Exquisite Twelve-in-One Fidget Toy (New 2.0 Version)

Second Iteration: 20% smaller, crisper tactile feedback, and added decorative cover

Following the release of the Twelve-in-One and its overwhelmingly positive reception, we incorporated extensive feedback, suggestions, and data to implement swift improvements. This model underwent nearly ten revisions, resulting in the most satisfying tactile experience to date

We welcome your feedback and suggestions! YEZAO will promptly address and adjust the design accordingly!!

Multiple de-stressing mechanisms, seamlessly printed, smooth rotation, satisfying click-clack buttons, combined with dials, ratchets, levers, joysticks, and clickers—a culmination of ingenious design for an enhanced grip. Your fingers nestle within the wheel, allowing for a satisfying spin reminiscent of twirling a revolver

Boost Me (for free)

Your support and feedback fuel our creative endeavors

This EDC boasts a plethora of functions. Print it instantly and fully immerse yourself in the experience

This design demanded considerable effort; a boost would be greatly appreciated

Printing Notes:

1. Ensure the filament is completely dry before printing to guarantee the proper functioning of the fidget toy's mechanisms;

The build plate must be impeccably clean to prevent spaghetti printing

2. After printing, allow the bed to cool completely before removing the print to prevent warping and compromised tactile feedback

3. Upon removal, some force may be required to separate any potential adhesion resulting from printer tolerances, filament type, or the integrated printing process. Avoid using supports for this integrated print

------------------------------------------Divider----------------------------------------------

We have also designed other fidget toys, available for download here

Seven-in-One Launch Fidget Toy

Five-in-One Fidget Toy EDC

Super Rabbit Fidget Toy edc - RABIT CLICKER

Must-Print for Beginners

Comment & Rating (3424)

@QiNuoDIY

Looking forward to the day the 108-in-1 is released 🤩

Show original

@cheeseboy45

Boosted

agreed

@ryan_tawileh

Same here!

@Cobra.fang

yes!! 👍 I would love that one

@KnightFire66

Boosted

Printed with PLA, came out surprisingly well. Look at photo please: 1. What is this ring for? 2. This support material does not remove clean, but wheel does turn freely. 3. Support nub is good, switch prints out nicely. 4. Button pushes in but does not pop out, had to cut out bits to make it work. 5. Wheel too smooth to rotate, need to use my fingernail to rotate it. 6. Little push button works excellent. 7. Three small joysticks... work well, but really just need one. 8. Dito #5, too small to turn without digging fingernail into it. 9. Works really well, first time I printed one out. 10. Rocker switch, works, but extremely difficult to make work the first time. 11. small flip switch and slider switch, work well, no issues. 12. these tabs are too thin and tiny, broke off easily after one child pulled the fidget toy apart. 13. these tabs are holding it all together now.

The designer has replied

@YEZAO

Okay, thank you very much for your feedback!! I will draw on and make targeted adjustments to the subsequent models

@YEZAO

I have tested both PLA and PETG here, and PETG has better elasticity. I suggest using PETG printing in the spring area

@user_1727777589

bro. dry your filament

@Tom_Bomb45

Print Profile

Single-plate version, one-plate printing, incredibly convenient, print with a single tap on your phone (reinforced 1.0)

the big switch would not move at all and just broke

The profile uploader has replied

@YEZAO

Just use some force to break it open

@Tom_Bomb45

i did but it broke tho

@user_1977100263

Same happened here. Maybe ever so slightly over extruded?

@boratepe

Print Profile

Multi-plate printing, facilitating color matching (reinforced 1.0)

I had some problems activating the different fidgets, and one of the switches fell off, the joystick broke as well. my filament was dry,but I had a lot of stringing. The design is really great though

The profile uploader has replied

@YEZAO

Received, thank you for the feedback. I will make adjustments as soon as I have free time after work

(Edited)

@aaronpesina

Boosted

I had it fail on these same places and the front button does morning I've printed this 3 times

(Edited)

@YEZAO

Replying to @aaronpesina :

Please use a small knife to separate the areas where consumables are stuck together

@user_2924575791

Print Profile

Single-plate version, one-plate printing, incredibly convenient, print with a single tap on your phone (reinforced 1.0)

no more stress

@Sk8er1113

nice color 👍🏻

(Edited)

@plasmadrone134

Print Profile

Single-plate version, one-plate printing, incredibly convenient, print with a single tap on your phone (reinforced 1.0)

Some parts stuck together and I broke it when I tried to fix it. Much more satisfying when I threw it at the floor👍

@user_1320918023

🤣

@Dragon_Printer

😂

@plasmadrone134

Replying to @Dragon_Printer :

It did feel really nice when I threw it though.

@cbus_maker

Ended up ok but lots of unattached filament on this overhang. no idea why its rounded here and split into 2.

The designer has replied

@YEZAO

This is to strengthen the hardness of this part, because many brothers have reported that the strength here is not enough

@MortnMX.

Replying to @YEZAO :

I noticed the same issue when i checked the slicer. The issue here is that, because of your modifier the slicer doesn´t bridge the area correctly and tries to print on thin air. After trying quite a while with modifying the modifier, i just changed the whole model to print with 3 walls. That should hopefully add the needed strengh and didn´t made the print to much longer. (I also changed the infill to gyroid) Anyway, thanks for the great model!

@L2.labs

same

@prazlook

Hello! Could you release a version 3.0 with joysticks similar to these: https://makerworld.com/en/models/51187?from=search#profileId-54318? This would allow them to return to their original position for greater user satisfaction

(Edited)

The designer has replied

Show original

@YEZAO

good idea

@prazlook

Replying to @YEZAO :

thx its always good to help.

@ryan_tawileh

Agreed

@turbopl

Print Profile

Single-plate version, one-plate printing, incredibly convenient, print with a single tap on your phone (reinforced 1.0)

Printed in PLA and everything is super loose a bit too much but still fun fidget not sure if PETG would make it better.

@user_648936391

PETG is surprisingly better! … but im still fidget with my pla one more!

(Edited)

@NickthekidNL

Boosted

This works amazingly, prints extremely well. Very fun to mess with. Printed it with a profile that let me print it all in one with my AMS. one of the most clean prints I've done yet

@user_1158180114

Nice color!

@Kaniick

wow that’s seriously red. what brand color filament is that? I like it.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.