Matterhorn Bad Weather
Print Profile(1)
Description
The beauty of the Matterhorn can change in an instant. It demands the utmost respect and reverence. I sought to capture this with this image.
Print with 100% infill, 0.08 mm layer height, and a 0.16 mm base layer.
Swap instructions:
Begin with black.
At layer #8 (0.72 mm), switch to blue-gray.
At layer #13 (1.12 mm), switch to gray.
At layer #21 (1.76 mm), switch to white for the remainder.
With AMS, this is pre-set.
The beauty of the Matterhorn can change in a flash. It is to be viewed with the utmost respect and reverence. I wanted to express this with this picture.
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Grey
At layer #21 (1.76mm) swap to White for the rest.
With AMS it is set.
Merry Christmas
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)