Ultimate Boot Remover -The BennyBoots Boot Remover

If you have a fancy set of boots, but don't want to pay $80+ for a fancy overpriced store bought boot remover, this is the print model for you.

This is a super strong, easy and comfortable to use boot (and shoe) remover.  And this protects your boot leather and exotic skin boots.   This Print model has a 2nd plate for printing a soft rubbery TPU protector strip to protect your fancy leather boots from damage.  The boot remover works without the TPU strip, but I highly recommend printing the TPU strip, unless you are using this only for your running shoes. 

I purposely made this with a very wide base for stability and for easy leverage and balance when removing the boot.  I tried with narrower base, but it made it tipsy, especially when standing on one foot while removing your boots.  I modeled the angles similar to Tecovas boot remover.   The “U” part, where you insert your heel, is angled up a little from the base to give you more room for big tall cowboy boots.  Other existing removers aren't elevated enough for a tall 1.5" - 2" cowboy heel, let alone a lady's much taller boot heel.  

I've printed a bunch of these for Christmas presents.

The Generic PETG print profile takes about 10 hrs to print the base, plus the time to print the TPU protective strip.  It is worth it for a nice functional boot remover.  Using Bambu Lab PLA Basic it can print in under 8 hrs.