hextraction more stable tri leg system for board - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

greentunadesign

Toys & Games>Board Games

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

4.4 h

4 plates

4.7(6)

Open in Bambu Studio

Boost

119

Released

Description

The standard hextraction legs I printed first were not stable at all, so I looked for a more stable version. On YouTube I found this tri leg system for the extra large 5-32 hextraction board by gerGOPRINT3D. I remixed it to fit the standard 5-22 board and adapted it for printing on my A1 mini by splitting the base in half. I'm very happy with it, it is easy to print, very stable and easy to take apart for storage or travel.

Comment & Rating (12)

@user_599799837

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed on first try! the only problem is that some supports are almost impossible to remove.

@user_1047912596

Genius, I just started the Hextraction project, and this is amazing. Will give this a try after my board completes

The designer has replied

@user_1047912596

I am half way through my print, just wonder what do you recommend to use to hold all the parts together?

@user_4279973868

Replying to @user_1047912596 :

I just stick the legs in the hole of the base, it's plenty stable for me and I like to be able to put it away flat. But if you want a more solid result you could use bolts through the holes or even glue it together too.

@LifeCoffeeGames

Boosted

really good print this. Much better than the basic legs

The designer has replied

@user_4279973868

thanks 👍

@MrMcDucky

Print Profile

0.2mm layer, 3 walls, 15% infill

good stand for hextraction board, u can glue on if u want but u dont have to :D

@Wolfjaw

Any chance you could rebuild this as a single piece base and short leg, plus the separate tall legs? I have a P1S, and don't want to glue/tape bits back together.