Cat Backpack for Dummy 13

Don't leave your Dummy 13's pet at home! Equip this fun cat backpack to keep your Dummy 13's familiar safe and nearby while on adventure.

Directions:

1. Go to your local grocery store and check for gumball machines so you can get a gumball-machine-toy capsule. They're usually $0.50. Make sure it's the 1 inch/26 mm version. (Consider getting a few in case you mess up while cutting)

   

2. Measure 11 mm from the opening and CAREFULLY score then cut all the way around. You will end up with a ring and a dome. You can discard the ring. You can print the cutting jig and snap the capsule into the jig and use the jig to help you cut exactly where you need to.

   

   

   

   

3. PLEASE DON'T CUT YOURSELF

4. Print the file. Make sure you choose the one with the peg (the cat fits on the peg and stays in place) or the one without a peg (in case you want to put another creature in there), and delete the other (else it will print both).

   

5. Be very careful when removing supports as the cat's tail and straps will easily snap.
6. Insert the dome and the magnets. You will need two 5x1 magnets. Both the magnets and the dome should pressure fit into place, but you can glue them if you want. If you glue the magnets in, MAKE SURE THE POLARITIES MATCH!!!

7. You will need to remove the Dummy 13 arms to attach the straps, then insert the backpack through the straps hole. (of course, the straps are optional)

   

8. Upload photos of your print!!!!

Attribution:

Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0